American Bulldog Breed and Standard by Sanders Kennels.


AB Males AB Females Available Adults Available Puppies Upcoming Litters Puppy contract Puppy Gallery Breed & Standard Mission Statment Dog Training Shows & Events Presa Canarios About Us Contact Us Home

HISTORY:

It is speculated that the ancestors of the American Bulldog were brought to the British Isles circa 50 AD by the ancient Romans whose renowned war dogs are ancestor to many molosser breeds today.   Originally called "pugnace-" from the Latin word pugnare "to fight" these ancestors remained in the British Isles as war dogs- who were often trained to pull down horses during battle- throughout the early Middle Ages.  When the William the Conqueror defeated the Saxons in 1066, the Norman conquest began.  The Normans infiltrated the Saxon society with their language and culture, including their traditions of baiting bulls, bears, lions, horses, dogs, and other animals for amusement.  The native dogs were bred and used widely in England for this purpose and for working livestock for centuries.  They were bred for working function.  These truculent and tenacious dogs were known for their strong character, athleticism and strength, great heart and gameness.   They were often referred to as fawn or brindle and white and eventually became known as "Bulldogs" during the 17th century.   In 1835, baiting contests were made illegal and the bulldog in England was ultimately crossed with the pug, eventually becoming the English Bulldog.  Fortunately, the dog that would become the American Bulldog emigrated to the Americas centuries before and remains far truer to the archetype of the original Bulldog.

 

AN AMERICAN TRADITION:

The American Bulldog is the breed that most closely resembles the original "Bulldog." Since the 1600's English colonists brought with them the old working Bulldog for use as utility farms dogs, catching livestock, and protecting the farm from animals and other intruders.   These bulldogs required speed, endurance, strength, courage, heart and loyalty as they were used to vanquish bears, wolves, coyotes, mountain lions, wild boar and catch domestic livestock.  For centuries, these dogs thrived on working farms and in rural areas in Georgia, Alabama, Tennessee, Florida and the Carolinas.  While they were called by various names and had a certain diversity in type, these Bulldogs were all true to the heritage as a total working dog. 

 

THE MODERN AMERICAN BULLDOG:

Eventually, the number of these dogs dwindled and until the 1960's when breed enthusiasts such as John D Johnson and Alan Scott strove to bring back the breed from extinction.  The American Bulldog is still considered a rare breed.  The modern American Bulldog maintains some diversity in type as many working farms continue to breed for function alone.  There are, however, two main types the Johnson (Classic) and Scott (Standard).  

 

Johnson's American Bulldogs are larger is size and are bullier.  Johnson dogs were bred first for form and second for function.  They were used for show and personal protection work.  The Scott or Standard type are bred primarily for working ability and are slightly smaller with their larger counterparts, yet are considered more athletic with greater agility.     You can see the general differences between these two types in the NKC Standard below.

 

It is important to note that the while Scott type American Bulldogs are often referred to as Standard American Bulldogs, not all Standard American Bulldogs are from Scott's lines. There still exist a number of breeders and old lines in the South, many of which remain unknown to the outside, that maintain the true characteristics of the working American Bulldog.  Among these lines are the Old Southern Whites and the Alapaha Blue Blood Bulldogs-which some consider to be its own breed.  In general, most of these traditional American Bulldogs are considered Standard type. *

 

Aside from Johnson and Standard American Bulldogs, some breeders seek to combine the elements of the two in what is known as a hybrid.   Sanders Kennels has a strong hybrid program that emphasizes the strength and heart of a Standard with the size and structure of a Johnson.

WHAT TO EXPECT FROM YOUR SANDERS AMERICAN BULLDOG:
American Bulldogs are a superior family dog and form a strong bond with their human family. With stable and outgoing temperaments, intelligence, drive, and heart, Sanders American Bulldogs are an asset as a companion, guardian, and protector.
 

STANDARD:

NATIONAL KENNEL CLUB

AMERICAN BULLDOG BREED STANDARD

 

Historically the American Bulldog was bred to be a “farm utility dog”. They were used to farm work in the South/Southeastern sections of the USA to work wild boar and cattle. They were also very much a part of the family, and were instrumental in personal and property protection as well.

General Appearance

The American Bulldog is a well-balanced, short-coated, muscular and athletic animal. American Bulldogs display great strength, endurance, and agility. Males are characteristically larger, heavier boned and more masculine than the females.

Temperament

American Bulldogs should be alert, outgoing and confident. Aloofness with strangers is acceptable.

Some assertiveness toward other dogs is not considered a fault.

Faults: Overly aggressive or excessively shy.

Size

Standard Type: Ideal standard males should measure between 23 to 27 inches at the withers and weigh from 75 to 95 pounds. Females; 21 to 25 inches, 60 to 85 pounds.

Bully Type: Ideal bully males should measure between 23 to 27 inches at the withers and weigh 90 to 115 pounds. Females; 22-26 inches 80 to 105 pounds.

Note: The overall proportion of the dog is of utmost importance when evaluating weight.

Head

The head should be broad, flat on top squared appearance with a well defined stop. It should also be medium in length with pronounced muscular cheeks.

Standard Type: A box or wedge shape is preferred.

Bully Type: A larger rounder shape is ideal.

Muzzle

The muzzle should be broad with wide-open nostrils. The muzzle should be wider at the base and taper to the nose. The lips should be full with black pigmentation; some pink allowed. The chin is well defined and must not overlap the upper lip nor covered it.

Standard Type: Muzzle should be medium in length 2 to 4 inches. It should also be 35% to 45% of the overall length of the head.

Bully Type: Muzzle should be broad 2 to 3 inches in length and should be 25% to 35% of the overall length of head.

Faults: Pendulous Lips. Narrow muzzle. Full black mask.

Note: The muzzle should be in proportion to head size & type.

Nose

Preferred nose color is Black. Red, brown or grizzle colors will occur.

Cosmetic Faults: Pink or Dudley nose. Any nose color other than black.

Dentition (Bite)

Teeth should be medium to large and should not be visible when mouth is closed. Lips are moderately thick; black pigment lining the lips is preferred; with some pink allowed.

Standard Type: A tight undershot (reverse scissors) preferred. Undershot up to '/4 inch acceptable.

Bully Type: ¼ - ½ inch “Undershot” depending on size of dog and shape of skull. Plus or minus 1/8 inch is acceptable.

Faults: Small teeth or uneven incisors.

Disqualification: Overshot, Parrot mouth or wry mouth.

Bully Type: Disqualification: Even, level or scissor bite.

Note: American Bulldogs are a working breed and should not be penalized for broken or missing teeth.

Eyes

Almond-shaped to round, medium-sized. Color: Brown is the ideal color; however, Blue, Gray, and Green eyes will occur. The haw should not be visible. Black eye rims preferred.

Cosmetic Faults: Both eyes not matched in color. Pink eye rims. Excessive Haw visible

Serious faults: Crossed or non-symmetrical eyes.

Ears

The ears should be set high on the head, medium in size may be drop, semi-prick, or rose.

Faults: Cropped ears. Hound Ears.

Neck

Slightly arched, very muscular, and of moderate length, tapering from shoulders to head.

Bully Type: Neck is almost equal to the head in size.

Fault: neck too short and thick; thin or weak neck.

Body

Wide, deep chest; fairly compact, straight and well balanced. The chest should not be narrow or excessively wide, nor should the elbows be angled out or pulled in. The back should be broad and moderately short, showing great strength.

Faults: The back should not be narrow, excessively long or swayed.

Note: The degree of fault will depend on how it affects the dogs “working” ability and movement.

Forequarters

The chest should be deep and moderately wide giving the appearance of power and athletic ability. The front, overall, should be straight and well balanced. The chest should not be narrow or excessively wide.

Faults: Upright or loaded shoulders; elbows turned outward or tied-in; down at the pasterns; front legs bowed; wrists knuckled over; toeing in or out.

Hindquarters

Broad, well muscled with muscles tapering well to the leg to manifest speed and strength, but not quite as large as at the shoulders. There should not be an excess or lack of angulations in the rear legs.

Serious Faults: Narrow or weak hindquarters; straight or over angulated stifle joint; weak pasterns; cow hocks or open hocks; sickle hocks; bowed legs.

Legs

The legs should be strong and straight with moderate to heavy bone. Front legs should not set too close together or too far apart. Pasterns should be strong, straight and upright. The rear legs should be moderately angulated and parallel.

Serious Faults: Excessively Bow-Legged in the front. Straight or over angulated stifle joint; weak pasterns; cow hocks or open hocks; sickle hocks; bowed legs.

Feet

The feet are round, medium in size; toes are well arched, and tight.

Faults: Splayed feet or crooked toes.

Note: The seriousness of this fault is based on the amount of fault in the feet.

Tail

Strong at the root tapering to the hocks, in a relaxed position. The tail is carried over the back when excited or walking. A "pump handle" tail is preferred but any tail carriage from upright, when the dog is excited, to relaxed between the hocks is acceptable. The tail should not end in a complete circle.

Faults: Tail curled over the back; corkscrew tail, kinked or crooked tail.

Note: Natural tails preferred, docked tails acceptable but will be considered a cosmetic fault.

Gait

The gait should be “balanced and smooth”, showing great speed, agility and power. The dog should not travel excessively wide, and as speed increases the feet move toward the centerline of the body to maintain balance. The top line remains firm and level, parallel to the line of motion.

The Bully type gait will have a slight degree of less reach, flexibility, and spring than that of a Standard Type.

Faults: Legs not moving on the same plane; legs over reaching; legs crossing over in front or rear; front or rear legs moving too close or touching; pacing; paddling; side winding.

Coat

Short and smooth, coarse to the touch.

Disqualification: Long and fuzzy coats.

Color

Solid white, any color or color pattern, including black, red, brown, fawn and all shades of brindle.

Faults: Solid Black, any degree of merle.

Disqualification: Flat Black or Blue Color.

Disqualifications

Dogs that have been spayed or neutered.

Males that are unilaterally or bilaterally crypt orchid.

Unilateral or bilateral blindness or deafness.

Blue or flat black color; long and fuzzy coats.

Overshot Bite.

Extreme viciousness or shyness.

Bully Type: Even or scissor bite.

Shyness A dog shall be judged fundamentally shy if, refusing to stand for examination, it shrinks away from the judge; if it fears an approach from the rear; if it shies at sudden and unusual noises to a marked degree.

Note: Puppies should not be faulted severely here. With maturity and socialization confidence should increase.

Viciousness A dog that attacks, or attempts to attack either the judge or its handler unprovoked, is definitely vicious. An aggressive or belligerent attitude towards other dogs shall not be deemed vicious.

Cosmetic Faults: A cosmetic fault is one of a minor nature. A fault not specified as cosmetic has to do with structure as it relates to a working dog.

Structural Faults: These faults pertain to the dogs actual structure and fundamental movement. These faults are weighted as to how they hinder the dogs' ability to work.

In a show or other evaluation, the dog is to be penalized in direct proportion to the degree of the fault. Any fault which is extreme should be considered a serious fault and should be penalized appropriately.

Note: Features that are disqualified or faulted in the show ring, are in no way is meant to disqualify the dog from “working events”, or to take away any credit the dog might have as a “working dog”. The conformation ring is just that, it is not meant to be a judgment for a dogs working abilities; however there is no excuse for dogs with poor temperaments and these dogs should be kept away from NKC show and working events.

 

*References: The Evolution of the Bulldog: A Historical Survey, RH Voss; Pit Bulls and Tenacious Guard Dogs, C Semencic, Moloss.com.

 

Presa Canario Males | Presa Imported Males | Presa Females | Imported Presa Females

 Upcoming Presa Litters | Available Presa Adults | Import Puppies | Available Presa Puppies | Working Gallery

  American Bulldog Males | American Bulldog Females | Upcoming AB Litters | Available AB Adults  

 Available AB Puppies | Puppy Contract | Sanders Puppy Gallery | AB Breed & Standard | Dog training

Shows and Events |  Presa Breed & Standard | Spain & Canary Islands Photos | AB Mission Statement | Presa Mission Statement

 Links | About Us | Home


Reserve your pup today.

Will ship anywhere or personally deliver your New puppy or Trained Adult
.
Noah Sanders
(770) 475-6009 / (404) 408-5121

 sanderskennels@gmail.com